Sistem Otomatisasi Pengangkat Sampah pada Daerah Aliran Sungai Berbasis Internet of Things (IoT)
DOI:
https://doi.org/10.22216/jsi.v7i2.729Keywords:
Internet of Things, AT Mega328p, Watershed, Conveyor, Garbage LiftAbstract
Garbage in the watershed of the city of Padang is the cause of flooding every year. The use of the garbage net method that is stretched horizontally in watersheds has so far been considered ineffective, because waste still accumulates and floats in the watershed so that it still causes flooding, so an automatic garbage lifter is needed from the watershed which is directly connected to the watershed. garbage dump. The method used in this automatic garbage lift system is to use a conveyor, as a tool to raise waste from the watershed to the landfill. While the AT Mega328p Microcontroller is used as the brain of the system which will later function to control the work of DC motors and Servo motors. The Esp8266 module is used as a Wifi module to connect equipment components to the internet network then forwarded to an application that is used to control the on/off switch and as a notifier when river water levels rise/fall with the Internet of Things (IoT) concept. The test results prove that the tool can work well.
References
N. Azkha, “Analisis timbulan, komposisi dan karakteristik sampah di Kota Padang,” J. Kesehat. Masy., pp. 14–18, 2006, [Online]. Available: http://jurnal.fkm.unand.ac.id/index.php/jkma/article/view/5.
H. Hayat, H., & Zayadi, “Model Inovasi Pengelolaan Sampah Rumah Tangga. JU-ke (Jurnal Ketahanan Pangan),” JU-ke (Jurnal Ketahanan Pangan), vol. 2, no. 2, pp. 131–141, 2018, [Online]. Available: issn: 2654-2811.
P. R. Mahyudin, “Issn 1978-8096,” Strateg. Pengelolaan Sampah Berkelanjutan, vol. 10, pp. 80–87, 2014.
J. Dobiki, “Analisis Ketersedian Prasarana Persampahan Di Pulau Kumo Dan Pulau Kakara Di Kabupaten Halmahera Utara,” Spasial, vol. 5, no. 2, pp. 220–228, 2018.
D. Dermawan, L. Lahming, and M. A. S. Mandra, “Kajian Strategi Pengelolaan Sampah,” UNM Environ. Journals, vol. 1, no. 3, p. 86, 2018, doi: 10.26858/uej.v1i3.8074.
A. Y. Chrise and Syafri, “Perancangan Bark Belt Conveyor 27B Kapasitas 244 Ton / Jam,” Jom FTEKNIK, vol. 4, no. 2, pp. 1–6, 2017, [Online]. Available: https://media.neliti.com/media/publications/200685-perancangan-bark-belt-convey0r-27b-kapas.pdf.
A. R. M. M.S Mukhlis, Yamato, “Sistem Mikrokontroller ATmega328P Sebagai Pengontrol Suhu dan Level Air,” no. Lcd, pp. 1–10, 2015.
Z. D. Dewi Lusita Hidayati Nurul, Rohmah F mimin, “Prototype Smart Home Dengan Modul Nodemcu Esp8266 Berbasis Internet of Things (Iot),” p. 3, 2019.
J. Arifin, L. N. Zulita, and H. Hermawansyah, “Perancangan Murottal Otomatis Menggunakan Mikrokontroller Arduino Mega 2560,” J. Media Infotama, vol. 12, no. 1, pp. 89–98, 2016, doi: 10.37676/jmi.v12i1.276.
Suwitno, “Mendesain Rangkaian Power Supply pada Rancang Bangun,” J. Electr. Technol., vol. 1, no. 1, pp. 1–7, 2016.
N. Nugroho and S. Agustina, “Perancangan Setting Rele Proteksi Arus Lebih Pada Motor Listrik Industri,” Transmisi, vol. 15, no. 1, pp. 40–46, 2013, doi: 10.12777/transmisi.15.1.40-46.
A. Hilal and S. Manan, “Pemanfaatan Motor Servo Sebagai Penggerak Cctv Untuk Melihat Alat-Alat Monitor Dan Kondisi Pasien Di Ruang Icu,” Gema Teknol., vol. 17, no. 2, pp. 95–99, 2015, doi: 10.14710/gt.v17i2.8924.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 SAINS DAN INFORMATIKA : RESEARCH OF SCIENCE AND INFORMATIC
This work is licensed under a Creative Commons Attribution 4.0 International License.
